Cabletron Systems 2H28-08R User Manual page 63

Device Type: 2H28-08R
Figure 5-8 Device Configuration Menu Screen
The following briefly explains each screen accessible from the Device
Configuration Menu screen:
GENERAL CONFIGURATION
The General Configuration screen allows the user to monitor and
configure operating parameters for the 2H28-08R. For details, refer
to Section 5.7.
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows the user to enter new
community names, change, or review the community names used as
access passwords for device management operation. Access is limited
based on the password level of the user. For details, refer to
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the
table of IP addresses used for trap destinations and associated community
names. For details, refer to
2H28-08R SmartSwitch 2208 User's Guide
Device Configuration Menu Screen
2H28-08R LOCAL MANAGEMENT
Device Configuration Menu
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES
SNMP TRAPS
SWITCH CONFIGURATION
ETHERNET INTERFACE CONFIGURATION
SMARTTRUNK CONFIGURATION
DEVICE SPECIFIC CONFIGURATION
EXIT
Section 5.9.
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
RETURN
Section
2286_66
5.8.
5-15