Displaying The Source And Destination Entries - Cabletron Systems 2H28-08R User Manual

Port Redirect Function Screen
Source Port [n] (Selectable)
Allows a selected port [n] to be changed to a source port.
Destination Port [n] (Selectable)
Allows a selected port [n] to be changed to a destination port.
Errors (Toggle)
Allows the user to configure the source ports to either send errored frames
to selected destination ports, or to drop errored frames, and send only
valid traffic to the destination ports. The default setting of this field is ON.
The current setting for the port is displayed in the Remap Errors field. For
information on how to change the default setting, refer to Section 5.15.2.
Status (Toggle)
Allows the addition or deletion of the source and destination ports
selected in the Source Port [n] and Destination Port [n] fields.

5.15.1 Displaying the Source and Destination Entries

There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. Each screen displays up to 8 port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command displays at the bottom of the screen,
allowing the user to navigate to either the next or previous screen.
For example, with three screens of entries, the NEXT command displays
at the bottom of the first screen. In the second screen, the NEXT and
PREVIOUS commands display. In the last screen, only the PREVIOUS
command displays.
To display the screen following the one you are currently viewing, use the
arrow keys to highlight NEXT. Press ENTER and the next screen of
entries displays.
2H28-08R SmartSwitch 2208 User's Guide 5-55