Cabletron Systems 2H28-08R User Manual page 66

Cabletron systems, inc. user's guide smartswitch 2h28-08r
Hide thumbs Also See for 2H28-08R:
Table of Contents

Advertisement

Chapter 5: Local Management
Default Gateway (Modifiable)
Displays the default gateway for the 2H28-08R. This field is not defined
until an appropriate value is entered. For details about why and how to set
the default gateway, refer to
Section
5.7.3.
TFTP Gateway IP Addr (Modifiable)
Displays and allows the user to set the TFTP Gateway IP address for the
2H28-08R. To set the TFTP Gateway IP address, refer to
Section
5.7.4.
Device Date (Modifiable)
Contains a value that the device recognizes as the current date. To set a
new device date, refer to
Section
5.7.5.
Device Time (Modifiable)
Contains a value that the device recognizes as the current time. To enter a
new time, refer to
Section
5.7.6.
Screen Refresh Time (Modifiable)
Contains the rate at which the screens are updated. This setting
determines how frequently (in seconds) information is updated on the
screen. To enter a new Screen Refresh time, refer to
Section
5.7.7.
Screen Lockout Time (Modifiable)
Contains the number of minutes (to a maximum of 30) that the Local
Management application displays a screen while awaiting input or action
from a user. For example, if the number 5 is entered in this field, the user
has up to five minutes to utilize each of the specified module's Local
Management screens.
In this example, after five minutes of "idleness" (no input or action), the
terminal "beeps" five times, the Local Management application
terminates the session, and the display returns to the Local Management
Password screen. To enter a new screen lockout time, refer to
Section
5.7.8.
Device Uptime (Read-Only)
Displays the total time that the device has been operating, in days, hours,
and minutes.
5-18
2H28-08R SmartSwitch 2208 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartswitch 2208Smartswitch 2208 2h28-08r

Table of Contents

Save PDF