Cabletron Systems 2H28-08R User Manual page 121

• help – If "help" is typed at the prompt, once ENTER is pressed, the
screen will display all commands available for the device.
the
The conventions used in describing the commands in Network
NOTE
Tools are as follows:
Arguments enclosed by [ ] are required.
Arguments enclosed by < > are optional.
In the following command examples, the information entered by
user is shown in bold Helvetica font
To abort the output or interrupt a process, press the CONTROL
key and c key simultaneously, designated as ^C here.
The commands are presented in the following format:
command:
Syntax:
Description:
Options:
Example:
2H28-08R SmartSwitch 2208 User's Guide
Shows the required command format. It
indicates where arguments, if any, must be
specified.
Briefly describes the command and its uses.
Lists any additional fields in the appropriate
format which may be added to the command.
Shows an example of the command.
Network Tools
.
5-73