Network Tools - Cabletron Systems Expansion module 6H122-08 User Manual

Chapter 5: Local Management
5.29

NETWORK TOOLS

The Network Tools function resides on the 6H122-08 and allows the user
to access and manage network devices.
Access the Network Tools screen by using the arrow keys to highlight the
NETWORK TOOLS menu item in the Module Menu screen and
pressing ENTER. The Network Tools screen displays.
Welcome to Network Tools
-> help
Commands Available to User
Built in Commands:
bridge
arp
netstat ping
show traceroute
telnet
soft_reset
atm_stp_state
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are two categories of commands in the command set.
• Built-in Commands – Allow the user to access and manage network
devices. The commands are arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft_reset, telnet, and link_trap.
• Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
5-96
defroute
reset
link_trap
Figure 5-35 Network Tools Help Screen
6H122-08 User's Guide
090829