Navigating Local Management Screens - Cabletron Systems 2H28-08R User Manual

5.4.1

Navigating Local Management Screens

The user's password is one of the community names specified
NOTES
in the SNMP Community Names screen. Access to certain
Local Management capabilities depends on the degree of
access accorded that community name. Refer to
If an invalid password is entered, the terminal beeps and the
cursor returns to the beginning of the password entry field.
Entering a valid password causes the associated access level
to display at the bottom of the screen and the Device Menu
screen to appear.
If no activity occurs for several minutes, the Local Management
Password screen redisplays and the session ends. The
password has to be reentered. See
information.
The 2H28-08R Local Management application consists of a series of
menu screens. Navigate through Local Management by selecting items
from the menu screens.
The 2H28-08R supports three modes of switch operation.
The switching modes are as follows:
• 802.1D Switching (traditional switching)
• 802.1Q Switching (port based switching)
• SecureFast VLAN (Cabletron Systems SecureFast switching)
Depending on the Operational Mode set for the device, the hierarchy of
the Local Management screens differ as shown in
and Figure 5-6. Refer to the appropriate figure that relates to the
Operational Mode set for the device to see the applicable Local
Management screen hierarchy.
2H28-08R SmartSwitch 2208 User's Guide
Accessing Local Management
Section 5.7.8
Figure
Section 5.8.
for more
5-4, Figure 5-5
5-9