High Speed Interface Configuration Menu Screen - Cabletron Systems 2E43-51 User Manual

Chapter 5: Local Management
5.13 HIGH SPEED INTERFACE CONFIGURATION MENU
SCREEN
The High Speed Interface Configuration Menu screen,
applies to the Fast Ethernet Interface Modules and the High Speed
Interface Module.
This screen does not display unless one or two Fast Ethernet
NOTE
Interface Modules and a High Speed Interface Module (HSIM)
are installed.
If only the Fast Ethernet Interface Module(s) or the HSIM is
installed, then the respective Fast Ethernet Interfaces screen or
the HSIM Setup screen displays instead of the High Speed
Interface Configuration Menu screen.
To access the High Speed Interface Configuration Menu screen from the
Device Specific Configuration Menu screen, use the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION menu
item and press ENTER. The High Speed Interface Configuration Menu
screen displays.
Event Message Line
Device Name: 2E43-51
SAVE
Figure 5-20 High Speed Interface Configuration Menu Screen
5-44
2E43-51 LOCAL MANAGEMENT
High Speed Interface Configuration Menu
FAST ETHERNET INTERFACES
HSIM
EXIT
2E43-51/2E43-51R User's Guide
Figure
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
RETURN
5-20,
22511-53