Cabletron Systems 2E43-51 User Manual page 114

Cabletron systems user's guide smartswitch 2e43-51, 2e43-51r

Table of Contents

Chapter 5: Local Management

Event Message Line

Module Type: 2E43-51

Po rt

State

[Secure]

[NonSecure] [

[Secure]

[NonSecure]

INTERFACE #: [1]

Figure 5-27 Port Level Security Conﬁguration Screen

The following section deﬁnes the ﬁelds on the Port Level Security

Conﬁguration screen.

Port (Read-only)

Indicates the repeater port on the ENET connector (ENET 1 through 4)

selected in the INTERFACE # ﬁeld. Refer to

connector/repeater port relationship on the device.

Table 5-5 ENET/Repeater Port Relationship

ENET 1 = Repeater ports 1 – 12

ENET 2 = Repeater ports 13 – 24

State (Selectable)

Used to select the state of security for frames received by any port on the

connector. The states are as follows:

•

Secure – Allows the ports on the connector to receive only those

frames with the address as determined by the selection in the

Lock/Learn ﬁeld.

5-66

2E43-51 LOCAL MANAGEMENT

Port Level Security Configuration

Lock/Learn

Action On Intruder

[LockOnNext]

[DisablePort] [SendTrap]

Unlocked]

[LockedOnAddr] [DisablePort] [SendTrap]

[Unlocked]

SAVE

Firmware Revision:

BOOTPROM Revision: XX.XX.XX

EXIT

Table 5-5

ENET 3 = Repeater ports 25 – 36

ENET 4 = Repeater ports 37 – 48

2E43-51/2E43-51R User's Guide

XX.XX.XX

Secure Address

[00-00-00-00-00-00]

[xx.xx.xx.xx.xx.xx]

[00-00-00-00-00-00]

RETURN

2251_113

for the

Table of Contents

This manual is also suitable for:

2e43-51r Smartswitch 2100 2e43-51 Smartswitch 2100 2e43-51r

Cabletron Systems 2E43-51 User Manual page 114

Related Manuals for Cabletron Systems 2E43-51

Related Products for Cabletron Systems 2E43-51

This manual is also suitable for:

Table of Contents