Chapter 3: Installation
3.2
UNPACKING THE 2E43-51
To unpack the 2E43-51 and verify the contents of the shipment, proceed
as follows:
1.
Open the carton and remove the packing material protecting the
2E43-51.
2.
Verify the contents of the carton as listed in
Item
2E43-51
Antistatic wrist strap
Console Cable Kit
RJ21 Angle Adapter
Rackmount Kit
Strain Relief Bracket
Release Notes
Power Cord (2E43-51 only)
Power Cord (2E43-51R only)
3.
Remove the black and yellow tape seal on the non-conductive bag to
remove the 2E43-51.
4.
Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact the
Cabletron Systems Global Call Center as described in
3.3
INSTALLING OPTIONS
Install any optional equipment before proceeding to
NOTE
Section
3-2
Table 3-1 Contents of 2E43-51 Carton
3.4.
Table
3-1.
Quantity
1
1
1
4
1
1
1
1
2
2E43-51/2E43-51R User's Guide
Section
1.6.