Table of Contents
Advertisement
Chapter 5: Local Management
5.4
ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Local
Management Password screen
made to the 2E43-51 the Local Management Password screen displays.
Before continuing, the user must enter a password (community name)
which is compared to the previously stored passwords. The level of access
allowed the user depends on the password. To set or change passwords,
refer to
Section
Local Management.
1.
Turn on the terminal. Press ENTER (up to four times) until the
2E43-51 Local Management Password screen displays. It is the
automatic line speed seeking feature of the port that makes it necessary
at times to press ENTER several times.
Event Message Line
Figure 5-3 The 2E43-51 Local Management Password Screen
2.
Enter the Password and press ENTER. The default super-user access
password is "public" or press ENTER.
5-8
Figure
5.8. The following steps describe the procedure to access
2E43-51 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
Rochester, NH 03866-5005 USA
(c) Copyright CABLETRON Systems, Inc, 1997
Device Serial Number:
Device Hardware Revision:
Device Firmware Revision:
Device BOOTPROM Revision:
Enter Password:
5-3. Whenever a connection is
P.O.Box 5005
(603) 332-9400
2E43-51/2E43-51R User's Guide
XXXXXXXXX
XX
X.XX.XX
X.XX.XX
22511-12
Advertisement
Table of Contents
