Snmp Traps Screen - Cabletron Systems 2E43-51 User Manual

Chapter 5: Local Management
5.9

SNMP TRAPS SCREEN

Since the 2E43-51 is an SNMP compliant device, it can send messages to
multiple Network Management Stations to alert users of status changes.
The SNMP Traps screen is shown in
To access the SNMP Traps screen from the Device Configuration Menu
screen, use the arrow keys to highlight the SNMP TRAPS menu item and
press ENTER. The SNMP Traps screen displays.
Event Message Line
Device Name: 2E43-51
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name (Modifiable)
Displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
5-34
2E43-51 LOCAL MANAGEMENT
SNMP Traps
Trap Community Name
public
public
public
public
public
public
public
public
Figure 5-16 The SNMP Traps Screen
Figure 5-16.
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
EXIT
2E43-51/2E43-51R User's Guide
XX.XX.XX
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
RETURN
2251-17