Setting The Operational Mode - Cabletron Systems 2E43-51 User Manual

Chapter 5: Local Management
5.7.9

Setting the Operational Mode

To set the Operational Mode, proceed as follows:
1. Use the arrow keys to highlight the Operational Mode field.
2. Press the SPACE bar to toggle to the appropriate operational mode
(802.1D SWITCHING, 802.1Q SWITCHING or SECURE FAST
VLAN).
3. Use the arrow keys to highlight the SAVE command, then press
ENTER. The warning screen shown in
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS MODULE.
ARE YOU SURE YOU WANT TO CONTINUE?
4. Use the arrow keys to highlight the YES command, then press
ENTER. The changes are saved and the device reboots.
If the 2E43-51 is set to 802.1Q SWITCHING, refer to your
NOTE
Port Based VLAN User's Guide to configure the devices for this
type of operation.
If the 2E43-51 is set to SECURE FAST VLAN, refer to your
SecureFast documentation set to configure the devices for this
type of operation.
5-26
YES
Figure 5-12 Configuration Warning Screen
Figure 5-12
WARNING!
2E43-51/2E43-51R User's Guide
displays.
NO
19601-84