Cabletron Systems 2E43-51 User Manual page 43

LED Color
RX Off
(Receive)
of ENET
1 – 4 and
Green
Ports 5
and 6
Amber
Red
TX Off
(Transmit)
LED of
ENET
1 – 4 and
Ports 5
and 6
Green
Amber
Red
LINK Amber
Ports of
ENET
1 – 4
2E43-51/2E43-51R User's Guide
Table 4-1 LANVIEW LEDs (Continued)
State
No link. No activity.
Port enabled or
disabled.
Blinking. Port
disabled.
Flashing. Port
enabled, activity.
Diagnostic failure.
Port enabled, and no
activity.
Should flash green
every two seconds
indicating BPDUs
being sent if STA is
enabled and there is a
valid link.
Flashing. Indicates
activity. Rate indicates
data rate.
Blinking. Port in
standby.
Port may be disabled
due to Spanning Tree.
Flashing. Indicates
collision rate.
Solid. Diagnostic
failure.
Solid. A link is
established with the
device connected to
the port.
Flashing. Link
established, but
administratively
disabled.
Off. No link.
Using LANVIEW
Recommended Action
No error.
No error.
No error.
Contact the Cabletron
Systems Global Call Center
for assistance.
1. Ensure that the STA is
enabled and that there is a
valid link.
2. Contact the Cabletron
Systems Global Call Center
for assistance.
No action.
1. Ensure that the port is not
disabled.
2. Contact the Cabletron
Systems Global Call Center
for assistance.
No action.
Contact the Cabletron
Systems Global Call Center
for assistance.
No action.
No action.
No action.
4-3