Repeater Configuration Menu Screen - Cabletron Systems 2E43-51 User Manual

5.18

REPEATER CONFIGURATION MENU SCREEN

The Repeater Configuration Menu screen,
the Repeater Level Security Configuration, or Port Level Security
Configuration screen. To access the Repeater Configuration Menu screen
from the Device Specific Configuration Menu screen, select the
REPEATER CONFIGURATION MENU item and press ENTER. The
Repeater Configuration Menu screen displays.
Module Type: 2E43-51
Figure 5-25 Repeater Configuration Menu Screen
The following introduces each screen that is accessible from the Repeater
Configuration Menu.
REPEATER LEVEL SECURITY CONFIGURATION
Used to set the state of security for each port of a connector
simultaneously. The ports can be set to receive all frames (NonSecure
state), lock on the source address of the next frame received
(LockOnNext) or lock on the address of the last frame received
(LockedOnAddr). For details, refer to
2E43-51/2E43-51R User's Guide
Repeater Configuration Menu Screen
2E43-51 LOCAL MANAGEMENT
Repeater Configuration Menu
REPEATER LEVEL SECURITY CONFIGURATION
PORT LEVEL SECURITY CONFIGURATION
EXIT
Section
Figure 5-25, is used to access
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
5.19.
XX.XX.XX
RETURN
2251_104
5-61