Cabletron Systems 2E43-51 User Manual page 120

Chapter 5: Local Management
The Switch Statistics screen displays the following fields:
Port # (Read-Only)
Identifies the network port.
ENET 1 = Network Port 1, 10 Mbps
ENET 2 = Network Port 2, 10 Mbps
ENET 3 = Network Port 3, 10 Mbps
ENET 4 = Network Port 4, 10 Mbps
Frames Rcvd (Read-Only)
Displays the number of frames received by the port since last power-up or
reset.
Frames Txmtd (Read-Only)
Displays the number of frames transmitted by the port since last power-up
or reset.
Frames Fltrd (Read-Only)
Displays the number of frames filtered by the port since last power-up or
reset.
Frames Frwded (Read-Only)
Displays the number of frames forwarded by the port.
CLEAR COUNTERS (Command)
This command clears all the counters of the ports displayed to zero. To
clear the counters, use the arrow keys to highlight CLEAR COUNTERS
at the bottom of the screen, then press ENTER.
5-72
Table 5-6 shows the port organization.
Table 5-6 Port Organization
Fast Ethernet Slot 5 = Port 5
Fast Ethernet Slot 6 = Port 6
HSIM Slot = Port 7
2E43-51/2E43-51R User's Guide