Table of Contents
Advertisement
Chapter 5: Local Management
If the COM port is reconfigured without a valid IP address set
!
on the device, the message shown in
CAUTION
Do not continue unless the outcome of the action is fully
understood.
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
3.
Use the arrow keys to highlight YES. Press ENTER.
4.
If you ENABLED the port, proceed to step 5. If you DISABLED the
port, use the arrow keys to highlight SAVE at the bottom of the screen,
then press ENTER.
5.
When the message "SAVED OK" appears, the edits you made are
saved.
Exiting without saving causes the message "NOT SAVED --
!
PRESS SAVE TO KEEP CHANGES" to appear. Exiting without
saving causes all edits to be lost.
CAUTION
6.
Use the arrows keys to highlight the Application field.
5-28
WARNING
YES
Figure 5-13 COM Port Warning Screen
Figure 5-13
NO
2E43-51/2E43-51R User's Guide
displays.
174252
Advertisement
Table of Contents
