Cabletron Systems 2E43-51 User Manual page 162

Appendix C: Optional Installations and Mode Switch Bank Settings
4. Carefully lower the Fast Ethernet Interface Module onto the standoffs
while inserting the module connector into the associated Motherboard
Connector.
5
Figure C-5 Installing the Fast Ethernet Interface Module
5. Press down firmly on the Fast Ethernet Interface Module until the pins
slide all the way into the Motherboard Connector. Ensure that the Fast
Ethernet Interface Module seats flush on the standoffs.
6. Secure the Fast Ethernet Interface Module with the screws saved in
steps 1 and 2.
7. Reinstall the cover.
C-10
6
Module
Module
Connector
Front
Standoffs
2E43-51/2E43-51R User's Guide
Rear
Standoff
Motherboard
Connector
2251-39