Using The Clear Counters Command; Repeater Statistics Screen - Cabletron Systems 2E43-51 User Manual

3. Press ENTER (neither the RMON Index # field nor the statistics will
change until ENTER is pressed).

5.24.2 Using the Clear Counters Command

To reset all the statistics counters of the selected interface to zero, perform
the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER, the counters for the selected index are reset to zero.
5.25

REPEATER STATISTICS SCREEN

Operating statistics for each repeater port (1 through 48) and its
corresponding network (ENETs 1 through 4) are displayed via the
Repeater Statistics screen shown in
To access the Repeater Statistics screen, use the arrow keys to highlight
the REPEATER STATISTICS menu item on the Device Statistics
Menu screen and press ENTER. The Repeater Statistics screen displays.
Event Message Line
Device Name: 2E43-51
Bytes Received:
Frames received:
Total Errors:
OOW Collisions:
CRC Errors:
Alignment Errors:
Undersize Packets:
Oversize Packets
Link Status:
Admin Status:
PORT #: nn
Figure 5-32 Repeater Statistics Screen for Repeater Ports (1 – 48)
2E43-51/2E43-51R User's Guide
2E43-51 LOCAL MANAGEMENT
Network #: xx
Collisions:
Broadcasts
Multicasts:
Repeater Statistics Screen
Figure 5-32.
Repeater Statistics
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
7500456
6789
0
0
0
0
0
0
0
0
0
Link
Enabled
CLEAR COUNTERS
XX.XX.XX
Port #: xx
7500456
6789
0
0
0
0
0
0
0
0
0
No Link
Disabled
RETURN
EXIT
22511-29
5-81