Snmp Community Names Screen - Cabletron Systems 2E43-51 User Manual

5.8

SNMP COMMUNITY NAMES SCREEN

The SNMP Community Names screen allows the user to set SNMP
Management community names. Community names act as passwords to
Local/Remote Management and are agents of security access to the
2E43-51. Access to the 2E43-51 is controlled by enacting any of three
different levels of security authorization (read-only, read-write, and
super-user).
Super-user access gives the user full management privileges,
NOTE
allows existing passwords to be changed, and all modifiable
MIB objects for the Cabletron Container MIB and Internet
MIB-II to be edited.
To access the SNMP Community Names screen from the Device
Configuration Menu screen, use the arrow keys to highlight the SNMP
COMMUNITY NAMES menu item and press ENTER. The SNMP
Community Names screen displays.
Event Message Line
Device Name: 2E43-51
SAVE
Figure 5-15 SNMP Community Names Screen
2E43-51/2E43-51R User's Guide
2E43-51 LOCAL MANAGEMENT
SNMP Community Names
Community Name
public
public
public
EXIT
SNMP Community Names Screen
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Access Policy
read-only
read-write
super-user
XX.XX.XX
RETURN
2251-16
5-31