High Speed Interface Configuration Menu Screen - Cabletron Systems 2E48-27R User Manual

5.14 HIGH SPEED INTERFACE CONFIGURATION MENU
SCREEN
The High Speed Interface Configuration Menu screen,
applies to the Fast Ethernet Interface Modules and the High Speed
Interface Module.
This screen does not display unless one or two Fast Ethernet
NOTE
Interface Modules and a High Speed Interface Module (HSIM)
are installed.
If only Fast Ethernet Interface Modules or an HSIM is installed,
than the respective Fast Ethernet Interfaces screen or the
HSIM Setup screen displays instead of the High Speed
Interface Configuration Menu screen.
To access the High Speed Interface Configuration Menu screen from the
Device Specific Configuration Menu screen, use the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION menu
item and press ENTER. The High Speed Interface Configuration Menu
screen displays.
Device Type: 2E48-27R
Figure 5-22 High Speed Interface Configuration Menu Screen
2E48-27R/2E49-27R User's Guide
High Speed Interface Configuration Menu Screen
2E48-27R LOCAL MANAGEMENT
High Speed Interface Configuration Menu
FAST ETHERNET INTERFACES
HSIM
EXIT
Figure
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
RETURN
5-22,
23143-53
5-49