System Resources Screen - Cabletron Systems 2E48-27R User Manual

5.13

SYSTEM RESOURCES SCREEN

The System Resources screen,
concerning the processor used in the 2E4X-27R and the amount of
FLASH memory, DRAM, and NVRAM that is installed and how much of
that memory is available. This screen also allows the user to monitor the
current processor (switch) utilization and the peak switch utilization.
To access the System Resources screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.
Event Message Line
Device Type: 2E48-27R
Flash Memory Installed: 4 MB
DRAM Installed:
NVRAM Installed:
SAVE
The following briefly defines each field of the System Resources screen.
CPU Type (Read-only)
Indicates the microprocessor used in the 2E4X-27R.
2E48-27R/2E49-27R User's Guide
Figure
2E48-27R LOCAL MANAGEMENT
System Resources
CPU Type: i960 HT 25 Mhz
16 MB
XX KB
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Figure 5-21 System Resources Screen
System Resources Screen
5-21, provides information
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
EXIT
XX.XX.XX
RETURN
RETURN
23142-23
5-47