System Resources Screen - Cabletron Systems 2H23-50R User Manual

REPEATER CONFIGURATION MENU
The Repeater Configuration Menu screen enables the user to select the
Repeater Port Configuration screen, which provides access to the security
screens: Repeater Port Configuration, Device Level Security
Configuration, and Port Level Security Configuration. For details refer to
Section 5.18.
5.12

SYSTEM RESOURCES SCREEN

The System Resources screen,
concerning the processor used in the 2H23-50R or 2H33-37R and the
amount of FLASH memory, DRAM, and NVRAM that is installed and
how much of that memory is available. This screen also allows the user to
monitor the current processor (switch) utilization and the peak switch
utilization.
To access the System Resources screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.
Event Message Line
Device Type: 2H23-50R
Flash Memory Installed: 4 MB
DRAM Installed:
NVRAM Installed:
SAVE
2H23-50R/2H33-37R User's Guide
Figure
2H23-50R LOCAL MANAGEMENT
System Resources
CPU Type: i960 HT 75 Mhz
20 MB
XX KB
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Figure 5-19 System Resources Screen
System Resources Screen
5-19, provides information
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
EXIT
XX.XX.XX
RETURN
RETURN
22861-23
5-45