Gas Tank/Seat Assembly - Arctic Cat 660 cc Service Manual

7. Install the right-side belly pan torx-head screws to
the center belly pan and tunnel; then return the
snowmobile to an upright position.
8. Install the right-side cap screws securing the
bumper to the air-intake silencer plenum.
9. Insert the right-side louver foam.
Back
AL190D
AL188D
AL186D
Back to TOC
8
10. Install the right-side louver.
11. Install the right-side front belly pan cap screw,
washer, and lock nut.
Gas Tank/Seat
Assembly
NOTE: Some components may vary from model
to model. The technician should use discretion
and sound judgment.
REMOVING (Touring/Trail)
1. Remove the console (see Console in this section).
Back to Section TOC
AL185D
AL184D
7
AL183D
Next
7-31