Arctic Cat 660 cc Service Manual page 237

10. Remove the shim washer from the idler sprocket.
11. Remove the outer idler sprocket from the shaft.
12. Slide the small rubber alignment pin from the face
of the inner idler sprocket and place in safe
location until assembly.
Back
AF426
AF436
AF437
Back to TOC
13. Remove the lock nut securing the top sprocket.
14. Remove the spring washer in front of the top
sprocket.
15. Set the brake lever lock. Remove the cap screw
and large washer securing the bottom sprocket.
NOTE: The bottom sprocket cap screw and
washer are spring loaded.
Back to Section TOC
AF439
AF432
8
AF444
Next
8-37