Arctic Cat 660 cc Service Manual page 186

2. Secure the front belly pan to the nosepiece with
torx-head screws.
3. Secure the front belly pan to the nosepiece with
Phillips-head screws.
4. Install the torx-head screws securing the belly pan
underneath the shock mount.
5. Install the shock absorber bolt. Tighten to
2.8 kg-m (20 ft-lb).
Back
AL182D
AL181D
AL179D
Back to TOC
6. Install the left-side steering tie rod boot. Secure
with the screws.
7. Install the torx-head screws securing the belly pan
to the frame and tunnel; then return the snowmo-
bile to an upright position.
8. Install the left-side front belly pan cap screw.
Back to Section TOC
AL178D
AL177D
7
AL175D
Next
7-27