Arctic Cat 660 cc Service Manual page 227

NOTE: Premature wear will result if the plastic
washer is not installed.
4. Noting the alignment marks made during
disassembling, place the stationary sheave onto
the torque bracket.
Back
FS097
FS096
Back to TOC
5. Place the spacer (retainer) into position on the
stationary sheave noting the proper location of the
holes from disassembling.
6. Noting the alignment marks made during
disassembling, place the movable sheave onto the
stationary sheave.
Back to Section TOC
FS095
FS094
8
FS093
Next
8-27