Arctic Cat 660 cc Service Manual page 79

33. On the Bearcat, connect the speedometer cable to
the speedometer and secure the cable to the hood
with cable ties.
NOTE: Install the cable ties in the original loca-
tions.
34. Connect the two instrument panel electrical
connectors near the front of the hood.
Back
MD1422
Back to TOC
35. Install the battery and vent hose; then secure with
the hold-down plate. Connect the positive cable
and then the negative cable.
NOTE: There is no vent hose on turbo-model
battery.
! WARNING
Battery acid is harmful if it contacts eyes, skin, or
clothing. Care must be taken whenever handling a
battery.
36. If the engine oil was drained, remove the filler cap
from the engine cover and add the recommended
amount of engine oil.
37. With all coolant hoses secure, add the engine
coolant (see Section 3 for proper procedure for
filling the cooling system).
Back to Section TOC
MD1419
2
Next
2-67