Arctic Cat 660 cc Service Manual page 296

INSTALLING
1. Install the rear idler wheel bracket and spacer; then
secure with cap screws and nuts.
2. Install the rear idler wheel (with the large diameter
insert positioned to the inside) and secure the rear
idler wheel with a cap screw (coated with blue
Loctite #243) and large washer. Tighten securely.
3. Secure the rear suspension arm bracket and back-
ing plate to the slide rail with cap screws and lock
nuts. Tighten securely.
Back
AG330
AG328
AO162
Back to TOC
4. Secure the rear suspension arm to the bracket with
existing hardware. Tighten securely.
5. Secure the cross-brace axle to the slide rail with
cap screws (threads coated with blue Loctite
#243). Tighten securely.
6. Place the shock pad into position and secure with a
rivet and push nut.
7. Place the end cap onto the rail and secure with the
cap screw, washer, and lock nut. Tighten securely.
Back to Section TOC
AO159
AO160
9
AO161
Next
9-23