Arctic Cat 660 cc Service Manual page 187

9. On the Bearcat, route the speedometer cable
through the belt guard; then install cable ties to
secure the speedometer cable to the belly pan.
Secure the speedometer cable to the speedometer
drive and close the belt guard.
10. Install the left-side cap screw securing the bumper
to the air-intake silencer plenum.
11. Insert the left-side louver foam.
Back
7-28
AL173D
AL172D
AL171D
Back to TOC
12. Install the left-side louver.
REMOVING RIGHT-SIDE
1. Remove the right-side front belly pan cap screw.
Account for a flat washer and a lock nut.
2. Remove the right-side louver.
3. Remove the right-side louver foam.
Back to Section TOC
AL170D
AL183D
AL184D
Next