Arctic Cat 660 cc Service Manual page 248

8. Install the three cap screws (coated with blue
Loctite #242) and tighten to 1 kg-m (7 ft-lb).
9. Apply a thin coat of grease to the spring and place
the spring into position in the end of the adjuster
bolt.
Back
8-48
AF400
AF419
AF401
Back to TOC
10. Use a thin coat of grease on the stem shaft to hold
it in position; then place the stem into the end of
the adjuster bolt.
11. Securely tighten the adjuster assembly to the chain
case.
12. Remove the set screw from the adjuster housing
and install the cap screw.
Back to Section TOC
AF418
AF417
AF416
Next