Engine-Related Items; Recoil Starter (120 Cc Model) - Arctic Cat 660 cc Service Manual

Engine-Related Items

NOTE: Throughout this section, the single sub-
section relating to the 120 cc model will be so des-
ignated. The remaining sub-sections will be for the
660 cc models.
NOTE: Some illustrations and photographs used
in this section are used for clarity purposes only
and are not designed to depict actual conditions.
Recoil Starter
(120 cc Model)
NOTE: It will be necessary to remove the engine
to access the recoil starter (see Section 2).
REMOVING/DISASSEMBLING
! WARNING
Always wear safety glasses when servicing the
recoil starter.
1. Remove the cap screws securing the recoil starter.
2. Pull the rope out of the housing and align with the
notch in the roller; then release the spring pressure
on the roller.
3. Remove the knot from the end of the rope.
3-2
GR304D
GR501D
Back to TOC
4. Remove the screw securing the plate to the roller.
5. Remove the plate.
6. Mark the ratchets for assembling purposes. The
ratchets must be installed in their respective holes.
Back to Section TOC
GR100D
GR502D
GR503D
GR504D
Next