2. Place the needle valve assembly and the float into
position and secure to the carburetor body with the
pin.
3. Install the splash ring onto the carburetor tower.
Back
4-6
GF325D
GF324D
GF323D
GF322D
Back to TOC
4. Secure the float chamber to the carburetor with the
drain bolt.
5. Install the pilot jet.
6. Install the high-speed adjuster screw and rotate the
screw clockwise until lightly seated; then rotate
the screw counterclockwise the proper number of
rotations as noted during disassembling.
Back to Section TOC
GF321D
GF320D
GF319
Next