Arctic Cat 660 cc Service Manual page 355

7. Install the mounting blocks and rear inner idler
wheels in the appropriate holes as noted during
disassembly and secure with cap screws (coated
with red Loctite #271) and lock nuts. Tighten to
3.2 kg-m (23 ft-lb).
8. Secure the front arm mounting bracket with the
cap screws (coated with red Loctite #271) and lock
nuts. Tighten to 2.4 kg-m (17 ft-lb).
Back
9-82
FS083B
AG673D
AG672D
Back to TOC
9. Place the spring into the slide blocks; then place
the spring slide and slide block assembly into posi-
tion on the slide rail. Secure with a cap screw
(coated with red Loctite #271) and washer.
Tighten to 3.2 kg-m (23 ft-lb).
10. Secure the front inner idler wheel axle with a cap
screw (coated with green Loctite #609) and lock
washer. Tighten to 3.2 kg-m (23 ft-lb).
Back to Section TOC
AG638D
AG680D
AG679D
Next