Assigning App Pages To Quicklaunch Buttons - Raymarine LIGHTHOUSE SPORT 3.18 Operation Instructions Manual

SideVision™
The SideVision™ fishfinder channel is represented using the
SideVision™ app icon.
The SideVision™ fishfinder channel provides a photo like
Scrolling 2D view of the water on each side of your vessel.
RealVision™ 3D
The RealVision™ 3D fishfinder channel is represented using
the RealVision™ app icon.
The RealVision™ 3D fishfinder channel provides a scrolling
3D view of the water behind and to the sides of your vessel.
Ice fishing app pages
When the display is configured for ice fishing (via the Startup wizard), the
available fishfinder modes will be represented using ice fishing app page
icons on the homescreen. These app pages enable you to select different
types of sonar view, optimized for ice fishing activities.
Trail & Radial
The trail and radial app page is a splitscreen page that
includes a traditional (historical), scrolling, 2D view and an
instantaneous (real-time) radial view of the water beneath
the transducer. The radial view shows the returns from the
sonar signal (using the same color coding as the traditional
scrolling view), organized in a circular formation. This view
enables you to quickly identify what is currently passing
under your transducer (e.g. bottom structure or target etc),
in each segment of the depth range.
Trail & A-Scope
The trail and A-scope app page is a splitscreen page that
includes a traditional (historical), scrolling, 2D view and
an instantaneous (real-time) A-scope view of the water
beneath the transducer.
42
Radial
The radial app page is a fullscreen page that provides an
instantaneous (real-time), radial view of the water beneath
the transducer. The radial view shows the returns from the
sonar signal (using the same color coding as the traditional
scrolling view), organized in a circular formation. This view
enables you to quickly identify what is currently passing
under your transducer (e.g. bottom structure or target etc),
in each segment of the depth range.
A-Scope
The A-scope app page is a fullscreen page that provides
an instantaneous (real-time) view of the water beneath the
transducer. This allows you to see what is currently passing
under your transducer (e.g. bottom structure or target etc),
rather than the historical display provided by the traditional,
scrolling, 2D view.

Assigning app pages to Quicklaunch buttons

App pages assigned to the Quicklaunch buttons are identified using the
associated Quicklaunch button number in the top right corner of the app
page icon.
You can change which app page is assigned to the Quicklaunch buttons by
following the steps below:
1. Using the [Directional pad], highlight the app page icon that you want
to assign to a Quicklaunch button.
2. Press and hold the relevant [Quicklaunch] button until the 'Quicklaunch
button configured' message is displayed.
The app page icon is updated to show the associated [Quicklaunch]
button number in the top right corner of the icon.
3. Repeat steps 1 and 2 for the remaining [Quicklaunch] buttons, if required.