INVT Goodrive350-19 Series Operation Manual page 155

Goodrive350-19 series VFD
Function
code
P08.04 Acceleration time 4
P08.05 Declaration time 4
Switching frequency of
P08.19 acceleration/deceleration
Reference frequency of
P08.21 acceleration/deceleration
P08.28 Automatic fault reset times
Automatic fault reset time
P08.29
6.5.8 Frequency setting
GD350-19 series VFD supports multiple kinds of frequency reference modes, which can be
categorized into two types: main reference channel and auxiliary reference channel.
There are two main reference channels, namely frequency reference channel A and frequency
reference channel B. These two channels support simple arithmetical operation between each other,
and they can be switched dynamically by setting multi-function terminals.
There is one input mode for auxiliary reference channel, namely terminal UP/DOWN switch input. By
setting function codes, you can enable the corresponding reference mode and the impact made on
the VFD frequency reference by this reference mode.
The actual reference of VFD is comprised of the main reference channel and auxiliary reference
channel.
Name
0.0–3600.0s
0.0–3600.0s
0.00–P00.03 (Max. output frequency)
0.00Hz: No switch over
If the running frequency is larger than
time
P08.19, switch to acceleration
/deceleration time 2
0: Max. output frequency
1: Set frequency
2: 100Hz
time
Note: Valid for straight-line
acceleration/deceleration only
0–10
0.1–3600.0s
interval
Description
- 148 -
Operating
Default
value
depended
Model
depended
Model
depended
0
0
0
1.0s