Table of Contents
Advertisement
Chapter 10. Updating Firmware
TFTP FIRMWARE UPDATES
Updating Firmware using TFTP
10-4
PLUS
ATLAS 810
supports firmware updates to any module via the 10BaseT
Ethernet port using TFTP from a network server. The network server must
be capable of supporting TFTP Server requests from the TFTP client within
PLUS
ATLAS 810
.
Before beginning this procedure,
•
you must have a level 2 password to perform updates of any modules
within ATLAS. Please consult the ATLAS administrator if this pass-
word is not known.
•
you must obtain the appropriate update file for the particular module
from ADTRAN Technical Support at (888) 4ADTRAN (423-8726).
•
you must copy the update file provided by ADTRAN to a network serv-
er that supports TFTP Server requests. Record both the IP address of the
server and the full path location of the update file to be downloaded.
Instructions for Updating Firmware Using TFTP
Step
1
Using a Telnet program,
Select System Utility / Update Firmware (see Figure 10-2 on
2
page 10-6).
Move the cursor to Module Slot, and press
appropriate module slot to update. To update multiple modules of
the same type, select All Modules of a Type from Module Slot.
3
(Only upgradable modules are displayed as choices for Module
Type when updating All Modules of a Type in the ATLAS.)
4
Select TFTP for the Transfer Method.
Enter into TFTP Server IP Address, the IP address of the
5
network server that was recorded earlier.
Enter into TFTP Server Filename, the full path name and
6
filename of the update file that was recorded earlier.
From Restart Schedule, select the time for the module to perform
a restart after completing the update process (see Restart
7
Schedule on page 6-17).
View Current Update Status to verify the progress of the current
8
firmware update or any errors encountered during the download
process (see Current Update Status on page 6-18).
PLUS
ATLAS 810
Action
to ATLAS.
log in
User Manual
. Select the
Enter
61200266L1-1
Advertisement
Table of Contents
