Table of Contents
Advertisement
Appendix A
This appendix describes the entries that may be logged by the system event log. Of particular impor-
tance is the log event's Category – this is the minimum severity level that must be set in order that the
event be logged.
Use caution when changing Categories from their default levels. If too many sources have their
Category values set too low, the number of messages being logged in a given period can be very
large. If too many messages are being logged too rapidly, system performance can be adversely
affected.
Most of the events discussed in the following tables are used primarily during troubleshooting and
should be turned off in normal operation:
•
Table A-1, System Event, begins on page A-2.
•
Table A-2, Switchboard Events, begins on page A-2.
•
Table A-3, Nx 56/64 Events, begins on page A-3.
•
Table A-4, Time Events, begins on page A-4.
•
Table A-5, Ethernet Events, begins on page A-5.
•
Table A-6, ISDN Events, begins on page A-5.
•
Table A-7, ISDN Cause Code Events, begins on page A-7.
•
Table A-8, Cause Code Log Entry Location Designations, begins on page A-9.
•
Table A-9, ISDN L2 Messages, begins on page A-9.
•
Table A-10, ISDN Call Control Messages, begins on page A-9.
•
Table A-11, Source: ISDN Information Elements, begins on page A-9.
61200266L1-1
System Event Logging
PLUS
ATLAS 810
User Manual
A-1
Advertisement
Table of Contents
