Chapter 4. Using the Front Panel
CRAFT PORT
THE FRONT PANEL LEDS
4-2
Use the CRAFT port to configure the system via an EIA-232 connection. The
CRAFT port provides the same functions and operations as the Control In
port located on the rear panel of the ATLAS 810
CRAFT port pinout (see also CRAFT Port on page 4-3 in Table 4-2).
PIN
NAME
1
GND
2
RTS
3
RXDATA
4
DTR
5
TXDATA
6
CD
7
UNUSED
8
CTS
PLUS
With the ATLAS 810
visual information about the status of the ATLAS 810
modules that may be installed. Table 4-2 on page 4-3 provides a brief de-
scription of the front panel features, and Table 4-3 on page 4-4 provides de-
tailed information about the LEDs.
PLUS
ATLAS 810
PLUS
Table 4-1. CRAFT Port Pinout
DESCRIPTION
Ground - connected to unit chassis
Request to send - flow control
Data received by the ATLAS 810
Data terminal ready
Data transmitted by the ATLAS 810
Carrier detect
—
Clear to send - flow control
powered-up, the front panel LED display provides
User Manual
. Table 4-1 gives the
PLUS
PLUS
PLUS
and any option
61200266L1-1