Figure 5. System Utility Menu; System Utility - ADTRAN TOTAL ACCESS 600R User Interface Manual

Total Access 600R User Interface Guide (UIG)
S C >N
YSTEM ONFIG ETWORK
Since some areas of the world use Daylight Savings Time, the Total Access 600R is designed to adjust the time on the
first Sunday in April and the last Sunday in October accordingly if this option is turned on. The choices are
The factory default is
N
O .
S C >N
YSTEM ONFIG ETWORK
This is the IP address of the time server that the Total Access 600R will request and receive time from. The factory
default is no entry in the host address field.
S C >N
YSTEM ONFIG ETWORK
This is the interval of time between each request the Total Access 600R sends out to the time server. A smaller refresh
time guarantees that the unit receives the correct time from the server and corrects possible errors more quickly. This
may be more taxing on the machine. A range of refresh times is available for the user to decide which is best for their
unit. The choices are
5
MINS
and The factory default is
60 .
MINS
S C >N
YSTEM ONFIG ETWORK
This displays the current status of the time negotiation process. If an error is displayed, check all connections and con-
figurations to try to resolve the problem.
S U
YSTEM TILITY
Use the menu to view and set the system parameters shown in Figure 5.
S U
YSTEM TILITY
Page 28
T >A
IME DJUST FOR
Y
ES .
T >H
IME OST
T >R
IME EFRESH
, 10 , 15 , 20
MINS MINS MINS
60
MINS .
T >S
IME TATUS

Figure 5. System Utility Menu

© 2002, ADTRAN, Inc.
D S
AYLIGHT AVING
A
DDRESS
, 25 , 30 , 35
MINS MINS MINS
, 40 , 45 , 50
MINS MINS MINS
64200600L1#T-31A
and
Y
ES
, 55 ,
MINS