ADTRAN ATLAS 810 Plus User Manual page 108

Adtran network device user manual
Hide thumbs Also See for ATLAS 810 Plus:
  • Q&a (22 pages)
Table of Contents

Advertisement

Chapter 9. Dial Plan Terminal Menu
»» DS0s Available
»» Trunk Type (Voice/
SW56)
»» Signaling Method
»» Direct Inward Dialing
DID Digits
Transferred
DID Prefix
9-14
Read security: 5
Indicates which DS0s of the T1 have been defined in this switched endpoint
(indicated by "! "), in another switched endpoint (indicated by "s"), or in a
dedicated map (indicated by "n"). The following symbols may display in
this field:
This DS0 is available. The digit that displays in this field rep-
digits 0—9
resents the last digit of the DS0 number.
This port is requesting this DS0 for this connection, but the
*
DS0 is not yet activated.
!
This DS0 is used by this port in this connection and is activat-
ed.
This DS0 is used in the switched Dial Plan.
s
S
This DS0 is used in the switched Dial Plan and conflicts with
this connection.
n
This DS0 is already used in this dedicated map.
N
This DS0 is already used in this dedicated map and conflicts
with this connection.
Write security: 3; Read security: 5
Use if the incoming service on this trunk is Switched 56 digital instead of
standard voice.
Write security: 3; Read security: 5
Defines to ATLAS the type of signaling to be used across this trunk. The sig-
naling selected needs to match the signaling being provided by the Net-
work (PSTN). The available options include E&M Immediate, E&M Wink,
Loop Start, and Ground Start.
Write security: 3; Read security: 5
Defines to ATLAS whether DID is being used by the Network. If DID is
Enabled, then the following information must be defined:
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS from the Network if DID is
used.
Write security: 3; Read security: 5
Defines to ATLAS the prefix digits which are not received as a part of the
DID number. ATLAS uses the combination of prefix and DID number to
determine the User endpoint that should receive the incoming call. This
option only displays if Direct Inward Dialing (DID) is set to Enabled. If DID
is Disabled, then you must define the trunk number.
PLUS
ATLAS 810
User Manual
61200266L1-1

Advertisement

Table of Contents
loading

Table of Contents