Table of Contents
Advertisement
Chapter 12. ADTRAN Utilities
SESSION
>
MENU
» Connect
»» Host Name
»» Port
»» Edit Entry
»» Add New
»» Delete
»» Connect
» Disconnect
12-6
Click on Session to open the Telnet session.
Opens dialog box for
setting Host Name and
Port parameters for a
Telnet session. Also lets
you Edit Entry, Add
New entry, and Delete
stored entries. When the parameters are set, click Connect to make the con-
nection. Click Cancel to end the session.
Accepts and stores host names. You may either enter a name, an IP address,
or a domain name directly from this field. Click on the drop-down arrow to
display a complete list of previously stored host names.
Provides several port options. You may enter port numbers directly into this
field to connect to non-standard ports or select the drop-down combo-box to
display the following options:
Telnet
Establishes a Telnet session
Echo
Provides a loopback for troubleshooting
Discard
Bit bucket; discards data
Returns the time
Daytime
Chargen
Displays as a unique character stream; used for self-tests
Changes either the unit name or
the IP address of each host. Press
either
or a
Tab, Return,
period (.
after each number in the IP ad-
dress to move to the next field. If
you press
or
while the
Return
(.)
cursor is located in each IP field,
that field entry is deleted.
Prompts you for the same information as the Edit Entry dialog box for new
host. When enabled, the Use DNS (Domain Name Server) feature allows users
to request Domain Look Up via a DNS server on the network, rather than spec-
ifying an IP address. The name then appears in the Host Name field.
Removes a host name from the list; simply select the host name you want to
remove, and, at the prompt, click Delete.
Establishes the Telnet session.
Terminates the Telnet session.
To re-establish the session, select Connect from Session Menu or press En-
ter three times. This action restores the previous connection.
PLUS
ATLAS 810
)
User Manual
61200266L1-1
Advertisement
Table of Contents
