System Utility; Upgrade Firmware; Figure 5. System Utility Menu - ADTRAN TA 544 User Manual

TA 544 User Manual/61200704L1-1A
Page 22 of 68
Status
This displays the current status of the time negotiation process. If an error is displayed, check all connections
and configurations to try to resolve the problem.

System Utility

Use the S U
YSTEM TILITY
> Upgrade Firmware
Updates firmware when TA 544 enhancements are released. Two transfer methods are available for use in updating
the TA 544 system controller.
Transfer Method
The two methods for upgrading are XMODEM and TFTP. (See Appendix B on page 51 and Appendix C on
page 54 for more information.) TFTP requires a TFTP server running somewhere on the network. The TA
544 starts a TFTP client function which gets the upgrade code from the TFTP server. Selecting XMODEM
will load the upgrade code through the
ity.
TFTP Server Address
This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is config-
ured) of the TFTP server.
TFTP Server Filename
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the
upgrade code.
Transfer Status
This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success
message will be displayed here.
TA 544 User Manual
menu to view and set the system parameters shown in Figure 5.

Figure 5. System Utility Menu

CRAFT
port using any PC terminal emulator with xmodem capabil-
© 2001, ADTRAN, Inc.