Table of Contents
Advertisement
Chapter 9. Dial Plan Terminal Menu
Quad T1/PRI Module (User Termination/PRI)
»» Switch Type
»» First DS0
»» Number of DS0s
» Strip MSD
» Network Specific
Facility Voice
» Network Specific
Facility Data
»» Called Digits
Transferred
9-16
When you are working in the User Termination section of the Dial Plan
menu, Slot is defined as a T1/PRI module, and Sig is set to PRI, the follow-
ing configuration options are available:
Write security: 3; Read security: 5
Defines the type of PRI switch that ATLAS is going to emulate. If connected
to another ATLAS, both need to be set to the same type. Options include
Lucent 5E, Northern DMS100, National ISDN, and AT&T 4ESS.
Write Security: 3 Read Security: 5
Defines to ATLAS the first active DS0.
Write Security: 3 Read Security: 5
Defines the number of DS0s used for calls on this PRI. DS0 24 is assumed to
be used by the PRI for the D channel.
Write Security: 3 Read Security: 5
Allows a selected quantity of the Most Significant Digits (MSD) of a dialed
number to be stripped prior to being forwarded out of the port. For exam-
ple, a Network port could be set to accept all calls beginning with 9 (9$),
and then with Strip MSD set to 1, all digits would be sent toward the Net-
work except the leading 9.
The Strip MSD parameter does not affect the Call Accept criteria.
All of the digits (including the MSDs that are subsequently
stripped) are used as Accept criteria.
Write Security: 3 Read Security: 5
Defines the specific facility IEs to send to the Network. Use this option if the
customer has subscribed to a network specific facility service such as AT&T
Megacom service. The facility request sent can be different for voice calls
versus data calls. A setting of
been subscribed.
Write Security: 3 Read Security: 5
Defines the specific facility IEs to send to the Network. Use this option if the
customer has subscribed to a network specific facility service such as AT&T
Megacom service. The facility request sent can be different for voice calls
versus data calls. A setting of
been subscribed.
Write security: 3; Read security: 5
Defines to ATLAS the number of called-number digits to forward. When
attached to a PBX, the PBX may be provisioned to expect to receive fewer
than all of the called digits of the incoming call. This would normally be set
$OO
to
.
PLUS
ATLAS 810
1RUPDO
indicates no special facilities have
1RUPDO
indicates no special facilities have
User Manual
61200266L1-1
Advertisement
Table of Contents
