Table of Contents
Advertisement
Name
ATLAS 810
T1:
Controller T1
Data A
Slot 0 Port 1
T1:
Controller T1
Data B
Slot 0/Port 2
T1:
Quad T1/PRI
Data C
Slot 1/Port 1
T1:
Controller T1
Voice A
Slot 0/Port 1
T1:
Controller T1
Voice B
Slot 0/Port 2
T1:
Quad T1/PRI
Voice C
Slot 1/Port 1
Configuring the Ports for Example 2
61200266L1-1
by-step procedures for creating a sample dedicated map based on the con-
nections and ports given in Table 8-1.
PLUS
DS0s
Port
9-24
RBS Off
9-24
RBS Off
9-24
RBS Off
1-8
RBS On
1-8
RBS On
1-8
RBS On
Begin by navigating to Terminal Menu/Modules. From this menu, configure
the various ports to match the framing parameters of the T1 line provided
by the telco.
Instructions for Configuring the Ports
Step
1
Select Slt / 0 (system controller T1/PRI port).
Set the line framing parameters by selecting Menu /
2
Configuration / Frame / ESF.
Copy this configuration information for use with additional ports.
3
(Navigate to Prt and press
Navigate to the port index number of the second port (Prt) and
4
press
to paste the configuration information. Press
P
paste.
5
Repeat Step 4 for the first port of the T1/PRI card located in Slot 1.
Navigate to the V.35 port Configuration submenu and repeat
6
Step 2 for the first port, followed by a copy-and-paste to the
second and third ports (see Figure 8-4).
ATLAS 810
Chapter 8. Dedicated Maps Terminal Menu
Table 8-1. Connections and Ports
Name
ATLAS 810
V.35 - A
Quad V.35
Slot 2/Port 1
V.35 - B
Quad V.35
Slot 2/Port 2
V.35 - C
Quad V.35
Slot 2/Port 3
T1-D
Quad T1/PRI DSX
Slot 1/Port 2
T1-D
Quad T1/PRI DSX
Slot 1/Port 2
T1-D
Quad/PRI DSX
Slot 1/Port 2
Action
.)
C
PLUS
User Manual
PLUS
DS0s
Port
N/A
N/A
N/A
1-8
RBS On
9-16
RBS On
17-24
RBS On
to confirm
Y
8-7
Advertisement
Table of Contents
