Table of Contents
Advertisement
»» Module Type
»» Transfer Method
TFTP Server
IP Address
TFTP Server
Filename
»» Restart Schedule
Restart Immediately
After Update
Restart at Specified
Date and Time
Restart Date and
Time
61200266L1-1
Write security: 1; Read security: 5
Reflects the module type selected in Module Slot. This is normally a read-
only field; however, if you selected All Modules of a Type, you must select
a particular module type to update all modules of that type. The selections
only include upgradable modules.
Write security: 1; Read security: 5
Lists the two transfer methods for updating firmware: XMODEM and TFTP,
after selecting a module slot. XMODEM transfers files by connecting to a
communications program that supports XMODEM uploads to the terminal
interface. TFTP transfers files by specifying an appropriate server address
and filename:
Write security: 1; Read security: 5
Configures the IP address of the TFTP Server on which the update file
resides. ATLAS uses this field to locate the network server on which the
update file resides.
Write security: 1; Read security: 5
Identifies the name of the update file to retrieve from the TFTP Server. Enter
the full path name and filename for the file.
Write security: 1; Read security: 5
Indicates when to restart the updated module to invoke the new code, after
selecting a module slot. The two options include Restart Immediately
After Update and Restart at Specified Date and Time:
Automatically restarts the module immediately after the update is complete.
Lets you specify a date and time to automatically restart the updated mod-
ule. (When you select this option, a new field called Restart Date and Time
displays below the current field.)
Write security: 1; Read security: 5
Defines the date and time to restart the system.
•
Enter the time using a 24-hour format (i.e., 23:00:00 for 11:00 pm).
•
Enter the date in mm-dd-yyyy format (i.e., 10-30-1998).
Restart at Specified Date and Time is only available for the
System Controller— not for modules residing in expansion slots,
since they are unable to maintain normal operation during the
update process.
ATLAS 810
Chapter 6. Terminal Menu and System Control
PLUS
User Manual
6-17
Advertisement
Table of Contents
