Event Logging; Syslog Setup; Real Time Clock - ADTRAN ATLAS 810 Plus User Manual

Adtran network device user manual
Hide thumbs Also See for ATLAS 810 Plus:
  • Q&a (22 pages)
Table of Contents

Advertisement

Chapter 6. Terminal Menu and System Control
Total LES Thrsh
Total LCV Thrsh
» Event Logging
» Syslog Setup
»» Transmission
»» Host IP Address
»» Host Facility
» Real Time Clock
»» Current Time/Date
»» Auto Daylight
Savings
6-12
(ESF) DS1. The default value is 132,960 CRC errors for an approximate BER
level of 10E-5.
The DS1 performance monitor Threshold Value for the Total Line Errored
Seconds (LES) parameter. The default value is 648 for an approximate BER
level of 10E-5.
The DS1 performance monitor Threshold Value for the Current 15 minute
Line Code Violations (LCV) parameter. The default value is 133,400 for an
approximate BER level of 10E-5.
Write security: 3; Read security: 5
Sets the system event severity level threshold for each of the
PLUS
ATLAS 810
system event types. Whenever a system event occurs, that
event is logged if the event's severity level is equal to or more severe than
the event type's current threshold setting. See System Event Logging on page
A-1 for detailed information on the system events.
Write security: 3; Read security: 5
Configures the ATLAS Syslog client for use with a Syslog server (supplied
on ADTRAN /Utility disk or available on most UNIX platforms).
Enables or disables the transmission of log events to the external Syslog
server.
Lists the IP address of the external server that is running the Syslog host dae-
mon.
Specifies the facility destination of log events. Facilities are located on the
host and are managed by the Syslog host daemon running on either a UNIX
machine or a PC.
Write security: 3; Read security: 5
Provides access to the following two options that you can review and edit:
Displays the current date and time, including seconds. To edit this field, en-
ter the time in 24-hour format (such as 23:00:00 for 11:00 pm), and enter the
date in mm-dd-yyyy format (for example, 09-23-1998).
When enabled, automatically updates the time and date when Daylight Sav-
ings Time starts and, also, when Standard Time starts.
PLUS
ATLAS 810
User Manual
61200266L1-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATLAS 810 Plus and is the answer not in the manual?

Table of Contents

Save PDF