Licenses - ADTRAN ATLAS 810 Plus User Manual

Chapter 6. Terminal Menu and System Control
»» Access Rights
»» Active
» Licenses
»» Feature
»» License Key
»» Serial Number
»» Lic cnt
»» Status
6-14
Instructions for Changing Passwords
Step
1 Select the Password field—a new Password field displays.
2 Type the new password in the Enter field.
3 Type the new password again in the Confirm field.
The password can contain up to 12 alphanumeric characters. You
can also use spaces and special characters in the password.
Write security: 0; Read security: 5
Defines the password level for the corresponding label. You can select from
six different password levels (see also Table 6-1 on page 6-2).
Write security: 0; Read security: 5
Displays the number of users for each label that are currently logged into
the system.
Menus to enable optional ATLAS feature upgrades (Frame Relay, etc.).
Names the ATLAS feature upgrade.
Displays the license key of the feature upgrade.
Displays the serial number of the feature upgrade.
Displays the number of instances of the feature that the license provides.
This field may not be applicable for a given feature—if it is not, this field is
blank.
Reflects the status, Permanent or Temporary, of the feature upgrade license
key.
PLUS
ATLAS 810
Action
User Manual 61200266L1-1