Table of Contents
Advertisement
Chapter 9. Dial Plan Terminal Menu
9-24
The following Step/Action Tables and numbered tables provide informa-
tion on setting up Example 3.
Instructions for Configuring the Ports for Example 3
Step
Prior to setting up the Dial Plan, you must configure the Controller
1
T1/PRI interfaces.
This configuration action only brings up the T1 transport; set the
2
BRI configuration (SPID and phone number) as part of the Dial
Plan.
Instructions for Setting Up the Dial Plan for Example 3
Step
Determine the network and the attached equipment (video
1
equipment and PBX) provisioning (see Table 9-1).
From Dial Plan, select Global Parameter, and enter the local area
2
code (needed for Caller ID operation).
Determine which ports are Network terminations and which are
3
User terminations.
Define the phone number acceptance and rejection criteria for
4
each termination.
Example 3 includes one PRI port terminating the network
(PRI-A) and three BRIs (BRI A, B, and C)—see Table 9-2.
User terminations include one PRI, one RBS T1, and three BRIs
(see Table 9-3).
PLUS
ATLAS 810
Action
Action
User Manual
61200266L1-1
Advertisement
Table of Contents
