Table of Contents
Advertisement
Chapter 6. Terminal Menu and System Control
»» Clear Self-test Log
» Ping
»» IP Address
»» Count
»» Size
»» Timeout
»» Round trip min
»» Round trip avg
»» Round trip max
»» Tx Stats
»» Reset Stats
6-22
Write security: 3; Read security: 5
Clears the self-test log.
Write security: 5; Read security: 5
Allows you to send pings (ICMP requests) to devices accessible via the net-
work.
Only one ping session can be active at a time.
Write security: 5; Read security: 5
Specifies the IP address to ping.
Write security: 5; Read security: 5
Specifies the number of pings to send. The default number of tries is 4, and
the maximum value is 99.
Write security: 5; Read security: 5
Specifies the size in bytes of the data portion of the ping request. The
default value is 64 bytes, and the maximum size is 1024 bytes.
Write security: 5; Read security: 5
Specifies the time in milliseconds to wait for the ping reply before timing
out. The default timeout is three seconds, and the maximum timeout value
is ten seconds.
Read security: 5
Displays the minimum round trip time of the ping request/reply of the cur-
rent set of pings.
Read security: 5
Displays the average round trip time of the ping request/reply of the cur-
rent set of pings.
Read security: 5
Displays the maximum round trip time of the ping request/reply of the cur-
rent set of pings.
Read security: 5
Displays the number of ping requests transmitted (n txed), the number of
ping replies received (n rxed) and the number of ping requests that were
lost (n lost).
Write security: 5; Read security: 5
Resets all ping statistics to zero. If the ping client is active, this menu will
stop it.
PLUS
ATLAS 810
User Manual
61200266L1-1
Advertisement
Table of Contents
