ADTRAN ATLAS 810 Plus User Manual page 150

Chapter 12. ADTRAN Utilities
12-14
Also, a level 3 or better password is required for performing a configuration
upload. Please consult the ATLAS administrator if level 3 access is not avail-
able.
Instructions for Retrieving a Configuration from TFTP Server
Step
Use Telnet to
log in
1
upload a configuration file.
2 Select the System Utility menu, then the Config Transfer menu.
Set the TFTP Server IP Address to the IP address of the machine
3 running the TFTP Server program. (If you are using the ADTRAN
TFTP Server, the IP address displays in the Status field.)
Change the TFTP Server filename to the filename of a previously
4 saved configuration you wish to load. (Enter the complete
directory path to the file.)
Move to the Load And Use Config button and press Enter to
5 proceed with the transfer. Respond with Y to confirm the transfer
request.
The ATLAS 810
configuration successfully loads. No additional confirmation
is requested, and any online sessions are terminated.
The Current Transfer Status field indicates the transfer progress. If the up-
load succeeds, the unit automatically reboots and runs using the new config-
uration. If the upload fails, an error message displays in the Previous
Transfer Status field. If the TFTP Server cannot be contacted, the transfer
attempt times out in approximately 20 seconds.
PLUS
ATLAS 810
Action
PLUS
to the ATLAS 810
PLUS
reboots immediately after a
User Manual
to which you want to
61200266L1-1